VITOLEN
111-G Nail sealing tape
The quick roll
One-sided self-adhesive sealing tape of a closed-cell cross-linked polyethylene foam and exposed adhesive side
Application
VITOLEN 111-G nail sealing tape is used for sealing of nail and screw penetration in the underlay at the application of counter battens on the rafters
Product benefits
- quick application without removal of a liner
- can be applied at low temperature
- the closed-cell foam hardly absorbs moisture
Processing instructions
Version 1
The VITOLEN 111-G nail sealing tape is glued to the clean and well-tensioned outside of the underlay. Then the counter battens are placed on the sealing tape strips and attached to the rafters with nails or screws.
Version 2
The nail sealing tape is glued to the clean and dry counter battens. - This can already be done in the workshop. After removing the liner, the counter battens are glued with the sealing tape side to the underlay and attached to the rafters with nails or screws.
It must be ensured that the necessary contact pressure is available directly under the nail or screw.
Storage and shelf live
6 months after receipt of goods, when stored at room temperature (20°C + 3°C and at 40 - 60 % relative humidity), in original packaging.
Technical data and product properties
thickness
3 mm
density (DIN EN ISO 845)
25 kg/m³
compressive strength (DIN ISO 844)
at 25 %
at 50 %
35 kPa
100 kPa
compression set (ISO 1856)
22 h at 23 °C and 25 % deformation
0.5 h after discharge
24 h after discharge
22 %
12 %
Water absorption (ISO 2896)
≤ 1 vol%
Temperature resistance
-30 °C to 80 °C
application temperature
5 °C to 30 °C
weathering resistance
good
resistance to condensation
very good
UV-resistance
limited
Individual
You cannot find the right product?
Would you like a different thickness, width or even cutting dies?
Do you need a special adhesive for your application?
Would you like to have your own company branding?
We manufacture individual solutions, depending on the quantity.
Uncomplicated and perfectly designed for your use.
Talk to us!